• To prevent any damage or injury make sure the surface you have chosen to install the iPool is level, smooth and free of any foreign objects. It is recommended to clean the area before installation.

• Once you have chosen a location, you need to make sure that the surface is able to withstand 1 ton of water to avoid any collapse or fracture due to overloading.

• Make sure the surroundings around the area you have chosen are free from any fire sources, pets, sharp objects, or other items that could potentially damage the iPool.

• There should be a source of water close by to fill the pool with 1500 gallons of water.

• Be sure to install the iPool in a place that will not cause any water damage to property.

• A space of at least 8.5ft x 11.5ft x 7.5ft is required for installing the iPool.

• Read through the instructions and make sure you understand them thoroughly before you install the iPool.

• Do not drag the iPool to move it. It can cause unwanted abrasions.

• When moving the iPool to a new location, drain the water to prevent any fractures or damage to the bottom of the iPool when lifting it up.

• To prevent any bending or deformation of the pipe frame do not lean on the pipes or use force when installing them.

• Contact us immediately at (805) 383-6266 in case of bending or deformation of the pipe frame.

• Be aware that if the iPool is left outside with a temperature of 50 degrees Fahrenheit or below it may cause damage to the piping and that is not covered under the warranty. See terms and conditions for more details.